Skip to content

STI Hawkeye Invidia Q300 Catback Exhaust Install

STI Hawkeye Invidia Q300 Catback

Subaru WRX STI GDB-F
Legal in 0
Subaru WRX STI
GDB-F (N/A)
Power
See specifications
0-60
See specifications
Top Speed
See specifications
Current Market Value
Contact for pricing
Find Your GDB-F

πŸ‡ΊπŸ‡Έ US Import Information

This vehicle will become legal to import in 0 under the 25-year exemption rule. Check our import guide for details on the process.

Disclosure: We may earn a commission from purchases made through affiliate links. This helps support our comprehensive JDM guides at no cost to you. See our full disclosure policy.
Moderate DIY
2-3 hours
Invidia Q300 Cat-Back Exhaust
Subaru WRX STI (GDB-F)Also compatible with: STI Blobeye GDB-D, STI Bugeye GDB-B with adapter
Estimated Cost
$850-$1,200
Parts: $650-$850
Labor: $200-$350
Horsepower
+8-12 hp
Torque
+6-10 lb-ft
Response
Slightly quicker rev response, deeper boxer growl
Prerequisites
  • β€’ Jack stands
  • β€’ Penetrating oil
Installation Progress0%

Installation Steps

1
Jack rear of car onto stands
10 min

Lift at reinforced chassis points

Parts Required
All parts needed for this modification
Invidia Q300 cat-back 3-inch
Quantity: 1 β€’ $720
Exhaust gaskets
Quantity: 2 β€’ $20
Tools Required
14mm + 17mm sockets
Common
Pry bar
Common
Supporting Modifications
Additional mods recommended or required for optimal performance
3-inch downpipe
recommended
Full 3-inch system maximizes gains
ECU flash
optional
Tune for new exhaust
Tuning Requirements
ECU Flash Required
Dyno Tune Required
Estimated Tuning Cost
$0

No tuning required for cat-back only. Downpipe addition would require tune.

Disclosure: We may earn a commission from purchases made through affiliate links on this page. This helps support our comprehensive modification guides. See our full disclosure policy.

STI Hawkeye Invidia Q300 Catback