STI Hawkeye Invidia Q300 Catback Exhaust Install
STI Hawkeye Invidia Q300 Catback
Legal in 0
Subaru WRX STI
GDB-F (N/A)
Power
See specifications
0-60
See specifications
Top Speed
See specifications
Current Market Value
Contact for pricing
Explore Wiki Sections
🇺🇸 US Import Information
This vehicle will become legal to import in 0 under the 25-year exemption rule. Check our import guide for details on the process.
Moderate DIY
2-3 hours
Invidia Q300 Cat-Back Exhaust
Subaru WRX STI (GDB-F)Also compatible with: STI Blobeye GDB-D, STI Bugeye GDB-B with adapter
Estimated Cost
$850-$1,200
Parts: $650-$850
Labor: $200-$350
Horsepower
+8-12 hp
Torque
+6-10 lb-ft
Response
Slightly quicker rev response, deeper boxer growl
Prerequisites
- • Jack stands
- • Penetrating oil
Installation Progress0%
Installation Steps
1
Jack rear of car onto stands
10 min
Lift at reinforced chassis points
2
Spray penetrating oil on flange bolts
10 min
3
Disconnect rear muffler from midpipe
15 min
4
Slide muffler off rubber hangers
15 min
5
Disconnect midpipe from downpipe
15 min
6
Remove midpipe from hangers
10 min
7
Install Invidia midpipe
20 min
8
Install Invidia rear muffler
15 min
9
Torque rear flange
10 min
10
Verify clearance and alignment
10 min
11
Start engine, check for leaks
5 min
Parts Required
All parts needed for this modification
Invidia Q300 cat-back 3-inch
Quantity: 1 • $720
Exhaust gaskets
Quantity: 2 • $20
Tools Required
14mm + 17mm sockets
Common
Pry bar
Common
Supporting Modifications
Additional mods recommended or required for optimal performance
3-inch downpipe
recommended
Full 3-inch system maximizes gains
ECU flash
optional
Tune for new exhaust
Tuning Requirements
ECU Flash Required
Dyno Tune Required
Estimated Tuning Cost
$0
No tuning required for cat-back only. Downpipe addition would require tune.
Disclosure: We may earn a commission from purchases made through affiliate links on this page. This helps support our comprehensive modification guides. See our full disclosure policy.
STI Hawkeye Invidia Q300 Catback
From the shop
Browse the shop →Original JDM designs, made to order.
