R34 GT-R Endless MX72 Plus Big Brake Kit Install
R34 Endless MX72 Plus Big Brake Kit
Legal in 0
Nissan Skyline GT-R
BNR34 (N/A)
Power
See specifications
0-60
See specifications
Top Speed
See specifications
Current Market Value
Contact for pricing
Explore Wiki Sections
🇺🇸 US Import Information
This vehicle will become legal to import in 0 under the 25-year exemption rule. Check our import guide for details on the process.
Advanced DIY
4-5 hours
Endless MX72 Plus 6-Piston Big Brake Kit
Nissan Skyline GT-R (BNR34)
Estimated Cost
$4,300-$5,200
Parts: $3,800-$4,400
Labor: $500-$800
Horsepower
0
Torque
0
Response
Significantly improved initial bite, superior fade resistance under sustained track use, 25% shorter stopping distances from 100 mph
Prerequisites
- • 18-inch minimum wheel diameter (clearance)
- • DOT 4 brake fluid on hand (2L)
- • Vacuum bleeder or assistant for pedal bleeding
Installation Progress0%
Installation Steps
1
Remove front wheels
15 min
Break lug nuts before jacking, torque to 108 Nm on reinstall
2
Remove stock Brembo front calipers
30 min
3
Remove stock 324mm rotors
10 min
4
Clean hub mating surface with brake cleaner and wire brush
10 min
5
Install Endless 2-piece 370mm front rotors
10 min
6
Mount Endless 6-pot calipers to bracket
20 min
7
Install Goodridge stainless lines
20 min
8
Repeat steps 1-7 for rear calipers
1 hour
9
Full system brake bleed
1 hour
10
Bed-in procedure
30 min
Parts Required
All parts needed for this modification
Endless MX72 Plus 6-pot front caliper kit
Quantity: 1 • $2,400
Endless 370x34mm 2-piece front rotors
Quantity: 2 • $600
Endless MX72 4-pot rear caliper kit
Quantity: 1 • $1,200
Endless 332x30mm 2-piece rear rotors
Quantity: 2 • $400
Goodridge stainless brake lines
Quantity: 4 • $240
Motul RBF 660 brake fluid
Quantity: 2 L • $75
Tools Required
19mm impact socket
Common
Brake bleeder kit (Motive pressure or Mityvac)
Rental: $15/day
Rental
Torque wrench
Common
Caliper brush
Rental
Supporting Modifications
Additional mods recommended or required for optimal performance
Endless ME20 track pads
recommended
MX72 Plus pads are street-oriented. Track pads required above 1 hour sustained track use
Cooling ducts (Do-Luck or GT-Wing)
optional
Brake cooling improves fade resistance 20% on track
Tuning Requirements
ECU Flash Required
Dyno Tune Required
Estimated Tuning Cost
$0
ABS recalibration not required — Endless kit maintains stock bias. May need to re-learn brake pedal sensor after 50 miles.
Disclosure: We may earn a commission from purchases made through affiliate links on this page. This helps support our comprehensive modification guides. See our full disclosure policy.
R34 Endless MX72 Plus Big Brake Kit
From the shop
Browse the shop →Original JDM designs, made to order.
